CanMore Sport-Guide Mate Instrukcja Właściciela

CherokeeChrysler Group LLC OWNER’S MANUAL 2014 Cherokee14KL74-126-AA First Edition Printed in U.S.A.2014

NOTE: It is illegal to remove or alter the VIN.VEHICLE MODIFICATIONS/ALTERATIONSWARNING!Any modifications or alterations to this vehicle couldseriousl

WARNING!Securely lock the seat cushion into position beforeusing the seat. Otherwise, the seat will not providethe proper stability for child seats an

Recommendations For Attaching Child RestraintsRestraint Type CombinedWeight of theChild + ChildRestraintUse any attachment method shown with an “X” Be

Lower Anchors and Tethers for Children (LATCH)Restraint SystemYour vehicle is equipped with the child restraint anchor-age system called LATCH, which

LATCH-equipped child seats without using the vehicle’sseat belts. Some seating positions may have a top tetheranchorage but no lower anchorages. In th

What is the weight limit (child’s weight +weight of the child restraint) for using theLATCH anchorage system to attach the childrestraint?65 lbs (29.5

Can the rear-facing child restraint touchthe back of the front passenger seat?Yes The child seat may touch the back of thefront passenger seat if the

Locating The LATCH AnchoragesIn addition, there are tether strap anchoragesbehind each rear seating position located onthe back of the seat.LATCH-comp

Center Seat LATCHThis vehicle has 5 lower LATCH anchorages in the rearseat. Anchorages A and B are used for the right outboardposition behind the fron

and buckle, the center seat belt can be used to restraintan occupant or child restraint in the center seatingposition.2. Right outboard and center sea

WARNING! (Continued)• If you are installing three child restraints next toeach other, you must use the seat belt and the centertether anchor for the c

THINGS TO KNOW BEFORE STARTING YOUR VEHICLECONTENTS䡵 A WORD ABOUT YOUR KEYS ...12▫ Ignition Node Module (IGNM) — If Equipped. .12▫ Keyless I

4. Attach the lower hooks or connectors of the childrestraint to the lower anchorages in the selected seat-ing position.5. If the child restraint has

the child restraint installation, instead of buckling itbehind the child restraint, route the seat belt through thechild restraint belt path and then

into the retractor. For additional information on ALR,refer to the “Automatic Locking Mode” description un-der “Occupant Restraints.” The cinching lat

What is the weight limit (child’sweight + weight of the child re-straint) for using the Tether Anchorwith the seat belt to attach a forwardfacing chil

Installing A Child Restraint With A SwitchableAutomatic Locking Retractor (ALR)1. Place the child seat in the center of the seatingposition. For some

8. If the child restraint has a top tether strap and theseating position has a top tether anchorage, connectthe tether strap to the anchorage and tigh

4. Finally, pull up on any excess webbing to tighten thelap portion around the child restraint while you pushthe child restraint rearward and downward

Installing Child Restraints Using The Top TetherAnchorage1. Look behind the seating position where you plan toinstall the child restraint to find the

WARNING!An incorrectly anchored tether strap could lead toincreased head motion and possible injury to thechild. Use only the anchorage position direc

CAUTION!Never use Non-Detergent Oil or Straight Mineral Oilin the engine or damage may result.NOTE: A new engine may consume some oil during itsfirst

▫ Transmitter Battery Replacement ...26▫ General Information ...29䡵REMOTE STARTING SYSTEM — IF EQUIPPED . .29▫ How To Use Rem

Exhaust GasWARNING!Exhaust gases can injure or kill. They contain carbonmonoxide (CO), which is colorless and odorless.Breathing it can make you uncon

Safety Checks You Should Make Inside TheVehicleSeat BeltsInspect the belt system periodically, checking for cuts,frays, and loose parts. Damaged parts

WARNING!Pedals that cannot move freely can cause loss ofvehicle control and increase the risk of serious per-sonal injury.• Always make sure that floo

Periodic Safety Checks You Should Make OutsideThe VehicleTiresExamine tires for excessive tread wear and uneven wearpatterns. Check for stones, nails,

UNDERSTANDING THE FEATURES OF YOUR VEHICLECONTENTS䡵 MIRRORS ...130▫ Inside Day/Night Mirror ...130▫ Automatic Di

▫ Head Restraints ...154▫ 60/40 Split Folding Rear Seat With Fold-FlatFeature ...156䡵 DRIVER MEMORY SEAT —

▫ Interior Lights ...173▫ Battery Saver Feature ...175䡵 WINDSHIELD WIPERS AND WASHERS ...175▫ Windshield Wiper O

▫ To Resume ...196▫ To Vary The Speed Setting ...197▫ Setting The Following Distance In ACC ...198▫ Overtake Aid

▫ ParkSense® System Usage Precautions...239䡵PARKSENSE® FRONT AND REAR PARK ASSIST —IF EQUIPPED ...241▫ ParkSense® Sensors ..

▫ Supplemental Restraint System (SRS) —Air Bags ...67▫ Advanced Front Air Bag Features ...70▫ Air Bag Deployment Sens

▫ Using HomeLink®...282▫ Security ...282▫ Troubleshooting Tips ...282▫ General Information.

▫ Wind Buffeting ...293▫ Sky Slider™ Maintenance ...294䡵 ELECTRICAL POWER OUTLETS ...294䡵 POWER INVERTER — IF

MIRRORSInside Day/Night MirrorA single ball joint mirror is provided in the vehicle. It isa twist on mirror that has a fixed position at the wind-shie

left, and right for various drivers. The mirror should beadjusted to center on the view through the rear window.This mirror automatically adjusts for

Assist CallThe rear view mirror contains an ASSIST push buttonwhich automatically connects the vehicle occupants toone of several predefined locations

NOTE: The passenger side convex outside mirror willgive a much wider view to the rear, and especially of thelane next to your vehicle.WARNING!Vehicles

Models With Express Window FeaturePress and release the mirror select button marked L (left)or R (right) and then press one of the four arrow buttonst

•The mirrors are accidentally manually folded/unfolded.• The mirrors come out of the unfolded position.•The mirrors shake and vibrate at normal drivin

Sun Visor “Slide-On-Rod” Feature — If EquippedThe sun visor “Slide-On-Rod” feature allows for addi-tional flexibility in positioning the sun visor to

The BSM detection zone covers approximately one laneon both sides of the vehicle (12 ft or 3.8 m). The zonestarts at the outside rear view mirror and

A WORD ABOUT YOUR KEYSYour vehicle uses either a key start ignition system orkeyless ignition system. The key start ignition systemconsists of a eithe

The BSM system monitors the detection zone from threedifferent entry points (side, rear, front) while driving tosee if an alert is necessary. The BSM

Entering From The RearVehicles that come up from behind your vehicle on eitherside and enter the rear detection zone with a relativespeed of less than

Overtaking/Approaching Overtaking/Passing140 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

The BSM system is designed not to issue an alert onstationary objects such as guardrails, posts, walls, foliage,berms, etc. However, occasionally the

WARNING!The Blind Spot Monitoring system is only an aid tohelp detect objects in the blind spot zones. The BSMsystem is not designed to detect pedestr

NOTE: In a parking lot situation, oncoming vehicles canbe obscured by vehicles parked on either side. If thesensors are blocked by other structures or

Blind Spot Alert Lights/ChimeWhen operating in Blind Spot Alert Lights/Chime mode,the BSM system will provide a visual alert in the appro-priate side

SEATSSeats are a part of the Occupant Restraint System of thevehicle.WARNING!• It is dangerous to ride in a cargo area, inside oroutside of a vehicle.

Reclining The Seatback Forward Or RearwardThe seatback can be reclined both forward and rearward.Push the seat recliner switch forward or rearward, th

Manual Seats — If EquippedManual Front Seat Forward/Rearward AdjustmentOn models equipped with manual seats, the adjustingbar is located at the front

Keyless Ignition Node (KIN)This feature allows the driver to operate the ignitionswitch with the push of a button, as long as the RemoteKeyless Entry

While sitting in the seat, lift up on the bar and move theseat forward or rearward. Release the bar once you havereached the desired position. Then, u

WARNING!Do not ride with the seatback reclined so that theshoulder belt is no longer resting against your chest.In a collision you could slide under t

Heated Seats — If EquippedOn some models, the front and rear seats may beequipped with heaters located in the seat cushions.WARNING!• Persons who are

NOTE: Once a heat setting is selected, heat will be feltwithin two to five minutes.When the HI-level setting is selected, the heater willprovide a boo

NOTE: Once a heat setting is selected, heat will be feltwithin two to five minutes.When the HI-level setting is selected, the heater willprovide a boo

Front Ventilated Seats With Uconnect®8.4A/8.4AN — If EquippedOn some models, both the driver and passenger seats areventilated. Located in the seat cu

Vehicles Equipped With Remote StartOn models that are equipped with remote start, the driver’sventilated seat can be programmed to come on during arem

The AHRs will automatically return to their normalposition following a rear impact. If the AHRs do notreturn to their normal position see your authori

WARNING!Do not place items over the top of the Active HeadRestraint, such as coats, seat covers or portable DVDplayers. These items may interfere with

NOTE: Prior to folding the rear seat, it may be necessaryto position the front seat to its mid-track position. Also,be sure that the front seats are f

Key Fob — If EquippedThe Key Fob also contains the Remote Keyless Entry(RKE) transmitter and an emergency key, which stores inthe rear of the Key Fob.

To Raise The Rear SeatNOTE: If interference from the cargo area prevents theseatback from fully locking, you will have difficultyreturning the seat to

DRIVER MEMORY SEAT — IF EQUIPPEDThis feature allows the driver to store up to two differentmemory profiles, for easy recall through a memoryswitch. Ea

2. Adjust all memory profile settings to desired prefer-ences (i.e., seat, side mirror and radio station presets).3. Press and release the SET button

Linking And Unlinking The Remote Keyless EntryTransmitter To MemoryYour Remote Keyless Entry (RKE) transmitters can beprogrammed to recall one of two

Memory Position RecallNOTE:• For vehicles equipped with an automatic transmission,the vehicle must be in PARK to recall memory posi-tions. If a recall

The distance the driver seat moves depends on whereyou have the driver seat positioned when you remove thekey from the ignition switch.• When you remo

TO OPEN AND CLOSE THE HOODTwo latches must be released to open the hood.1. Pull the hood release lever located under the driversside of the instrument

CAUTION!To prevent possible damage, do not slam the hood toclose it. Lower the hood until it is open approxi-mately 6 in (15 cm), and then drop it. Th

Rotate the headlight switch clockwise to the first detentfor parking light and instrument panel light operation.Rotate the headlight switch to the sec

Headlights On With Wipers (Available withAutomatic Headlights Only)When this feature is active, the headlights will turn onapproximately 10 seconds af

NOTE: You can insert the double-sided emergency keyinto the lock cylinders with either side up.Emergency Key Removal (IGNM) Emergency Key Removal (KIN

If you turn the headlights off before the ignition, they willturn off in the normal manner.NOTE:•The lights must be turned off within 45 seconds ofpla

NOTE:• Automatic High Beam Headlamp Control can beturned on or off using the Uconnect® System, refer to“Uconnect® Settings” in “Understanding Your Ins

Fog Lights — If EquippedThe front fog light switch is built into the headlightswitch.To activate the front fog lights, turn on the parkinglights or th

Turn SignalsMove the multifunction lever up or down and the arrowson each side of the instrument cluster flash to showproper operation of the front an

Lane Change AssistTap the lever up or down once, without moving beyondthe detent, and the turn signal (right or left) will flashthree times then autom

There are courtesy lights located above the front seats. Ifyour vehicle is equipped with a power sunroof thecourtesy lights are located above the rear

With the parking lights or headlights on, rotating theright dimmer control upward will increase the brightnessof the instrument panel lights and light

Dome Light PositionRotate the instrument panel dimmer control completelyupward to the second detent to turn on the interior lights.The interior lights

Windshield Wiper OperationRotate the end of the lever to one of the first four detentpositions for intermittent settings, the fifth detent for lowwipe

CAUTION!Always remove any buildup of snow that preventsthe windshield wiper blades from returning to the“park” position. If the windshield wiper switc

Ignition Or Accessory On MessageOpening the driver’s door when the ignition is in ACC orON (engine not running), a chime will sound to remindyou to pl

Windshield Washer OperationTo use the washer, pull the lever rearward toward youand hold while spray is desired. If the lever is pulledwhile in the in

WARNING!Sudden loss of visibility through the windshieldcould lead to a collision. You might not see othervehicles or other obstacles. To avoid sudden

Rain Sensing Wipers — If EquippedThis feature senses moisture on the windshield andautomatically activates the wipers for the driver. Thefeature is es

The Rain Sensing system has protection features for thewiper blades and arms, and will not operate under thefollowing conditions:• Low Ambient Tempera

To unlock the steering column, push the control handledownward (toward the floor). To tilt the steering column,move the steering wheel upward or downw

HEATED STEERING WHEEL — IF EQUIPPEDThe steering wheel contains a heating element that helpswarm your hands in cold weather. The heated steeringwheel h

Uconnect® 8.4 System — If EquippedTouch the “Controls” soft-key then touch the “HeatedSteering Wheel” soft-key to turn on the heated steeringwheel. Pr

Vehicles Equipped With Remote StartOn models that are equipped with remote start, the heatedsteering wheel can be programmed to come on during aremote

NOTE: In order to ensure proper operation, the Elec-tronic Speed Control System has been designed to shutdown if multiple Speed Control functions are

WARNING!Leaving the Electronic Speed Control system onwhen not in use is dangerous. You could accidentallyset the system or cause it to go faster than

WARNING! (Continued)• Do not leave children or animals inside parkedvehicles in hot weather. Interior heat build-up maycause serious injury or death.C

Pressing the SET (+) button once will result ina1mph(1 km/h) increase in set speed. Each subsequent tap ofthe button results in an increase of 1 mph (

WARNING!Electronic Speed Control can be dangerous where thesystem cannot maintain a constant speed. Your ve-hicle could go too fast for the conditions

WARNING!• Adaptive Cruise Control (ACC) is a conveniencesystem. It is not a substitute for active drivinginvolvement. It is always the driver’s respon

WARNING! (Continued)• When entering a turn lane or highway off ramp;when driving on roads that are winding, icy, snow-covered, slippery, or have steep

NOTE: Any chassis/suspension or tire size modifica-tions to the vehicle will effect the performance of theAdaptive Cruise Control.Activating Adaptive

NOTE: You cannot enable ACC under the followingconditions:• When in Four-Wheel Drive Low.• When you apply the brakes.• When the parking brake is set.•

To turn the system OFF, push and release the AdaptiveCruise Control (ACC) ON/OFF button again. At thistime, the system will turn off and the EVIC will

If the system is Set when the vehicle speed is below20 mph (32 km/h), the Set Speed shall be defaulted to20 mph (32 km/h). If the system is Set when t

To Turn OffThe system will turn off and clear the set speed inmemory if:• You push the Adaptive Cruise Control (ACC) ON/OFF button.• You push the Norm

To Vary The Speed SettingWhile ACC is set, you can increase the set speed bypressing the SET + button.Pressing the SET + button once will result ina1m

VEHICLES SOLD IN CANADAWith respect to any Vehicles Sold in Canada, the nameChrysler Group LLC shall be deemed to be deleted andthe name Chrysler Cana

CAUTION!The Sentry Key® Immobilizer system is not compat-ible with some aftermarket remote starting systems.Use of these systems may result in vehicle

• The ACC system maintains set speed when driving uphill and down hill. However, a slight speed change onmoderate hills is normal. In addition, downsh

Distance Setting 3 Bars (Long) Distance Setting 2 Bars (Medium)3UNDERSTANDING THE FEATURES OF YOUR VEHICLE 199

To increase the distance setting, press the Distance Set-ting — Increase button and release. Each time the buttonis pressed, the distance setting incr

• The distance setting is changed.• The system disengages. (Refer to the information onACC Activation).The maximum braking applied by ACC is limited;

Overtake AidWhen driving with ACC engaged and following a targetvehicle, the system will provide an additional accelera-tion to assist in passing vehi

WARNING!When the ACC system is resuming speed, the drivermust ensure that there are no pedestrians, vehicles orobjects in the path of the vehicle. Fai

• System Off• ACC Proximity Warning• ACC Unavailable Warning• The EVIC will return to the last display selected afterfive seconds of no ACC display ac

If weather conditions are not a factor, the driver shouldexamine the sensor. It may require cleaning or removal ofan obstruction. The sensor is locate

“Clean Front Windshield” WarningThe “ACC / FCW Limited Functionality Clean FrontWindshield” warning will display and also a chime willindicate when co

Service ACC/FCW WarningIf the system turns off, and the EVIC displays “ACC/FCW Unavailable Service Required”or “Cruise/FCWUnavailable Service Required

NOTE: When having the Sentry Key® Immobilizer Sys-tem serviced, bring all vehicle keys with you to anauthorized dealer.Customer Key ProgrammingProgram

Turns And BendsWhen driving on a curve with ACC engaged, the systemmay decrease the vehicle speed and acceleration forstability reasons, with no targe

Using ACC On HillsWhen driving on hills, ACC may not detect a vehicle inyour lane. Depending on the speed, vehicle load, trafficconditions, and the st

Narrow VehiclesSome narrow vehicles traveling near the outer edges ofthe lane or edging into the lane are not detected until theyhave moved fully into

Stationary Objects And VehiclesACC does not react to stationary objects and stationaryvehicles. For example, ACC will not react in situationswhere the

(Fixed Speed) CONTROL OFF. Pressing of the NORMAL(Fixed Speed) CRUISE CONTROL ON/OFF button willresult in turning ON (changing to) the Normal (FixedSp

set speed will continue to increase in 5 mph (10 km/h)increments until the button is released. The increase in setspeed is reflected in the EVIC displ

To Turn OffThe system will turn off and erase the set speed inmemory if:• You push the Normal (Fixed Speed) Cruise ControlON/OFF button.• You turn off

NOTE: FCW monitors the information from the forwardlooking sensors as well as the Electronic Brake Controller(EBC), to calculate the probability of a

NOTE:• The minimum speed for FCW activation is 5 mph(10 km/h).• The FCW alerts may be triggered on objects other thanvehicles such as guard rails or s

To turn the FCW system OFF, press the forward collisionbutton once to turn the system OFF (led turns on).To turn the FCW system back ON, press the for

To Arm The SystemFollow these steps to arm the Vehicle Security Alarm:1. Remove the key from the ignition system (refer to⬙Starting Procedures⬙ in ⬙St

Changing FCW And Active Braking StatusTo Change The FCW Sensitivity And Active BrakingSettings With Uconnect® 8.4/8.4A System Screen — IfEquipped.Foll

5. Press the “FWD Collision Warning” Far or Nearsoft-key for your desired preference. Then press theback arrow.6. Press the second “FWD Collision W...

Once the condition that limited the system performanceis no longer present, the system will return to its fullperformance state. If the problem persis

The driver may manually override the haptic warning byapplying torque into the steering wheel at any time.When only a single lane marking is detected

To turn the LaneSense system ON, press the LaneSensebutton to turn the system ON (LED turns off). A “LaneSense On” message is shown in the EVIC.To tur

Left Lane Departure — Only Left Lane Detected• When the LaneSense system is ON, the LaneSenseindicator is solid white when only the left lane mark-ing

NOTE: The LaneSense system operates with the similarbehavior for a right lane departure when only the rightlane marking has been detected.Left Lane De

• For example: If approaching the left side of the lanethe steering wheel will turn to the right.• When the LaneSense system senses the lane has beena

NOTE: The LaneSense system operates with the similarbehavior for a right lane departure.7.0 EVIC Screen — If EquippedWhen the LaneSense system is ON;

Left Lane Departure — Only Left Lane Detected• When the LaneSense system is ON, the LaneSenseindicator is solid white when only the left lane mark-ing

• Cycle the vehicle ignition system out of the OFFposition.• For vehicles equipped with Keyless Enter-N-Go™ ,press the Keyless Enter-N-Go™ Start/Stop

Left Lane Departure — Both Lanes Detected• When the LaneSense system is ON, the lane lines turnfrom gray to white to indicate that the lane markingsha

• For example: If approaching the left side of the lanethe steering wheel will turn to the right.• When the LaneSense system senses the lane has beena

NOTE: The LaneSense system operates with the similarbehavior for a right lane departure.Changing LaneSense StatusThe LaneSense system settings can be

NOTE:• When enabled the system operates above 37 mph(60 km/h) and below 112 mph (180 km/h).• Use of the turn signal suppresses the warnings.• The syst

(200 cm) from the rear fascia/bumper in the horizontaldirection, depending on the location, type and orienta-tion of the obstacle.ParkSense® Warning D

Single 1/2 Second Tone/Solid Arc Slow Tone/Solid Arc3UNDERSTANDING THE FEATURES OF YOUR VEHICLE 233

Slow Tone/Solid Arc Fast Tone/Flashing Arc234 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

The vehicle is close to the obstacle when the warningdisplay shows one flashing arc and sounds a continuoustone. The following chart shows the warning

WARNING ALERTSRear Dis-tance(in/cm)Greaterthan79 in (200cm)79-59 in(200-150cm)59-47 in(150-120cm)47-39 in(120-100cm)39-25 in(100-65cm)25-12 in(65-30 c

NOTE: ParkSense® will reduce the volume of the radio,if on, when the system is sounding an audio tone.Enabling And Disabling ParkSense®ParkSense® can

Security System Manual OverrideThe Vehicle Security Alarm will not arm if you lock thedoors using the manual door lock plunger.ILLUMINATED ENTRYThe co

REVERSE and the system is disabled, the EVIC willdisplay the “PARKSENSE OFF” message for as long asthe vehicle is in REVERSE.The ParkSense® switch LED

Cleaning The ParkSense® SystemClean the ParkSense® sensors with water, car wash soapand a soft cloth. Do not use rough or hard cloths. Do notscratch o

system misinterpreting a close object as a sensorproblem, causing the “PARKSENSE UNAVAILABLESERVICE REQUIRED” message to be displayed in theEVIC.• On

WARNING! (Continued)• Before using ParkSense®, it is strongly recom-mended that the ball mount and hitch ball assem-bly is disconnected from the vehic

• Automatic brakes will not be available if ESC is notavailable.• Automatic brakes will not be available if there is afaulted condition detected with

ParkSense® will retain the last system state (enabled ordisabled) from the last ignition cycle when the ignition ischanged to the ON/RUN position.Park

ParkSense® Warning DisplayThe ParkSense® Warning screen will only be displayed ifSound and Display is selected from the Customer -Programmable Feature

If an obstacle is detected in the left and/or right rearregion, the display will show a single flashing arc in theleft and/or right rear region and wi

Slow Tone/Solid Arc Fast Tone/Flashing Arc246 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

The vehicle is close to the obstacle when the warningdisplay shows one flashing arc and sounds a continuoustone. The following chart shows the warning

NOTE: Driving at speeds 5 mph (8 km/h) and abovedisables the system from responding to all RKE transmit-ter buttons for all RKE transmitters.Emergency

WARNING ALERTSRear Dis-tance(in/cm)Greaterthan79 in (200cm)79-59 in(200-150cm)59-47 in(150-120cm)47-39 in(120-100cm)39-25 in(100-65 cm)25-12 in(65-30

Radio Vol-ume Re-ducedNo Yes Yes Yes Yes Yes YesNOTE: ParkSense® will reduce the volume of the radio,if on, when the system is sounding an audio tone.

No Tone/Solid Arc No Tone/Flashing Arc250 UNDERSTANDING THE FEATURES OF YOUR VEHICLE

The vehicle is close to the obstacle when the warningdisplay shows one flashing arc and sounds a continuoustone. The following chart shows the warning

WARNING ALERTSFront Distance(in/cm)Greater than47 in (120 cm)47-39 in(120-100 cm)39-25 in(100-65 cm)25-12 in(65-30 cm)Less than12 in (30 cm)Arcs — Lef

If the Uconnect® System is equipped, chime volumesettings will not be accessible from the EVIC.The chime volume settings include LOW, MEDIUM, andHIGH.

REVERSE and the system is disabled, the EVIC willdisplay the “PARKSENSE OFF” message for as long asthe vehicle is in REVERSE.The ParkSense® switch LED

If ⬙PARKSENSE UNAVAILABLE WIPE REAR SENSORS⬙or ⬙PARKSENSE UNAVAILABLE WIPE FRONT SEN-SORS⬙ appears in the Electronic Vehicle InformationCenter (EVIC)

• ParkSense®, when on, will reduce the volume of theradio when it is sounding a tone.• Clean the ParkSense® sensors regularly, taking carenot to scrat

CAUTION! (Continued)• The vehicle must be driven slowly when usingParkSense® in order to be able to stop in timewhen an obstacle is detected. It is re

To Unlock The Doors And LiftgatePress and release the UNLOCK button on the RKEtransmitter once to unlock the driver’s door or twicewithin five seconds

providing audible/visual instructions, and controllingthe steering wheel. The ParkSense® Active Park Assistsystem is defined as “semi-automatic” since

To enable the ParkSense® Active Park Assist system,press the ParkSense® Active Park Assist switch once(LED turns on).To disable the ParkSense® Active

• Performing 6 parking attempts to position the vehicleinto the parking space.The ParkSense® Active Park Assist system will onlyoperate and search for

display. You may switch to perpendicular parking if youdesire. Push the OK button on the left side steering wheelswitch to change your parking space s

When an available parking space has been found, and thevehicle is not in position, you will be instructed to moveforward to position the vehicle for a

NOTE:• It is the driver’s responsibility to use the brake andaccelerator during the semi-automatic parking maneu-ver.• When the system instructs the d

When the vehicle has been moved into the parallel parkposition you will be instructed to place the shift lever intothe DRIVE position, move forward sl

Your vehicle is now in the parallel park position. Whenthe maneuver is complete, the driver will be instructed tocheck the vehicle’s parking position.

wheel switch to change your parking space setting to aperpendicular maneuver. You may switch back to paral-lel parking if you desire.NOTE:• When searc

When an available parking space has been found, and thevehicle is not in position, you will be instructed to moveforward to position the vehicle for a

To Lock The Doors And LiftgatePress and release the LOCK button on the RKE transmit-ter to lock all doors and liftgate. The turn signal lightswill fla

NOTE:• It is the driver’s responsibility to use the brake andaccelerator during the semi-automatic parking maneu-ver.• When the system instructs the d

When the vehicle has been moved into the perpendicularpark position you will be instructed to place the shiftlever into the DRIVE position, move forwa

Your vehicle is now in the perpendicular park position.When the maneuver is complete, the driver will beinstructed to check the vehicle’s parking posi

CAUTION!• The ParkSense® Active Park Assist system is onlya parking aid and it is unable to recognize everyobstacle, including small obstacles. Parkin

WARNING! (Continued)• Before using the ParkSense® Active Park Assistsystem, it is strongly recommended that the ballmount and hitch ball assembly is d

vehicle is shifted into PARK or the ignition is switched tothe OFF position. A touch screen control (soft button) todisable display of the camera imag

WARNING!Drivers must be careful when backing up even whenusing the ParkView® Rear Back Up Camera. Alwayscheck carefully behind your vehicle, and be su

4. Press the check box soft key next to “Parkview®Backup Camera” to enable/disable.NOTE: A check mark will appear in the selection box toindicate the

NOTE: HomeLink® is disabled when the Vehicle Secu-rity Alarm is active.Before You Begin Programming HomeLink®Be sure that your vehicle is parked outsi

NOTE:• Erasing all channels should only be performed whenprogramming HomeLink® for the first time. Do noterase channels when programming additional bu

Programming Additional TransmittersProgramming Key Fobs or RKE transmitters may beperformed at an authorized dealer.Transmitter Battery ReplacementThe

2. Place the hand-held transmitter 1 to 3 in (3 to 8 cm)away from the HomeLink® button you wish to pro-gram while keeping the HomeLink® indicator ligh

Reprogramming A Single HomeLink® ButtonTo reprogram a channel that has been previously trained,follow these steps:1. Turn the ignition switch to the O

• To program the remaining two HomeLink® buttons,repeat each step for each remaining button. DO NOTerase the channels.Reprogramming A Single HomeLink®

2. Place the hand-held transmitter 1 to 3 in (3 to 8 cm)away from the HomeLink® button you wish to pro-gram while keeping the HomeLink® indicator ligh

3. Without releasing the button proceed with“Canadian/Gate Operator Programming” Step 2 andfollow all remaining steps.Using HomeLink®To operate, press

WARNING!• Your motorized door or gate will open and closewhile you are programming the universal trans-ceiver. Do not program the transceiver if peopl

POWER SUNROOF WITH POWER SHADE — IFEQUIPPEDThe power sunroof switch is located to the left betweenthe sun visors on the overhead console.The power sha

WARNING!• Never leave children unattended in a vehicle, anddo not leave the key fob in or near the vehicle. Donot leave the ignition of a vehicle equi

Opening Sunroof — Manual ModeA comfort stop position is a programmed automatic stopfor the sunroof open position. The comfort stop positionhas been op

NOTE: If the sunshade is in the closed position when thevent switch is pressed, the sunshade will automaticallycycle to the halfway open position prio

2. Separating RKE halves requires screw removal andgently prying the two halves of the RKE transmitterapart. Make sure not to damage the seal duringre

Closing Power Shade — Manual ModeTo close the shade, press and hold the switch in theforward position. Any release of the switch will stop themovement

Ignition Off OperationFor Vehicles Not Equipped With The Electronic VehicleInformation Center (EVIC)The power sunroof switch will remain active for 45

CAUTION! (Continued)• Never attempt to open or close the Sky Slider™when it is frozen. Wait until the Sky Slider™ isthawed before operating.• Opening

WARNING! (Continued)• If potential danger exists while opening or closingthe Sky Slider™ in Automatic Mode, press andrelease the switch immediately to

• To resume the operation from a partially open posi-tion, press and release the switch a second time.• The Sky Slider™ will not open from the front a

Manual OverrideThe Sky Slider™ drive motors are mounted to the roofabove the cargo lamp. In the event that your vehiclelosses battery power, you can c

Sky Slider™ MaintenanceRefer to “Sky Slider™ Top Care” in “Maintaining YourVehicle” for further information.ELECTRICAL POWER OUTLETSYour vehicle is eq

In addition to the front power outlet, there is also a poweroutlet located in the storage area of the center console.The rear power outlet is located

WARNING! (Continued)• Do not touch with wet hands.• Close the lid when not in use and while driving thevehicle.• If this outlet is mishandled, it may

POWER INVERTER — IF EQUIPPEDThere is a 115 Volt, 150 Watt inverter outlet located on theback of the center console to convert DC current to ACcurrent.

TABLE OF CONTENTSSECTION PAGE1INTRODUCTION ...32THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

3. Remove the battery by turning the back cover over(battery facing downward) and tapping it lightly on asolid surface such as a table or similar, the

WARNING!To avoid serious injury or death:• Do not insert any objects into the receptacles.• Do not touch with wet hands.• Close the lid when not in us

your Qi enabled mobile phone. Qi is a standard that usesmagnetic induction to transfer power to your mobiledevice.Your mobile phone must be designed f

NOTE: The initial adjustment will only need to be doneonce as long as only one mobile phone is used. If adifferent mobile phone is used, the cradle wi

CUPHOLDERSThere are two cupholders for the front seat passengers,located in the center console.There are two cupholders for the rear seat passengers,l

STORAGEGlove Box Storage CompartmentThe glove box storage compartment is located on thepassengers side of the instrument panel. Pull outward onthe lat

Console Storage CompartmentSome vehicles may be equipped with a wireless chargingpad located in the upper portion of the center console.Refer to Wirel

The center console has a storage area which can hold cellphones, PDAs, and other small items.WARNING!Do not operate this vehicle with a console compar

Rear Storage BinThe rear storage bins are located in the rear of the vehicleon the sides of the load floor.Cargo Tie-Down Hooks And LoopsThe tie-downs

WARNING!The weight and position of cargo and passengers canchange the vehicle center of gravity and vehiclehandling. To avoid loss of control resultin

The removable retractable cargo area cover mounts in thecargo area behind the top of the rear seats.The cover, when extended, covers the cargo area to

new battery with your fingers. Skin oils may causebattery deterioration. If you touch a battery, clean itwith rubbing alcohol.4. To assemble the RKE t

WARNING!In a collision, a cargo cover loose in the vehicle couldcause injury. It could fly around in a sudden stop andstrike someone in the vehicle. D

and operate for several wipe cycles after the end of thelever is released, and then resume the intermittent inter-val previously selected.If the lever

CAUTION!Failure to follow these cautions can cause damage tothe heating elements:• Use care when washing the inside of the rearwindow. Do not use abra

CAUTION!• To avoid damage to the roof rack and vehicle, donot exceed the maximum roof rack load capacity.Always distribute heavy loads as evenly as po

UNDERSTANDING YOUR INSTRUMENT PANELCONTENTS䡵 INSTRUMENT PANEL FEATURES ...315䡵 INSTRUMENT CLUSTER — BASE ...316䡵 INSTRUMENT CLUSTER — PR

䡵 Uconnect® RADIOS — IF EQUIPPED ...382䡵 iPod®/USB/MP3 CONTROL — IF EQUIPPED . .382䡵 STEERING WHEEL AUDIO CONTROLS — IFEQUIPPED ...

INSTRUMENT PANEL FEATURES1 — Air Demister Outlet 5 — Instrument Cluster 9 — Passenger Air Bag 13 — Stop/Start Ignition Button2 — Air Outlet 6 — Electr

INSTRUMENT CLUSTER — BASE316 UNDERSTANDING YOUR INSTRUMENT PANEL

INSTRUMENT CLUSTER — PREMIUM4UNDERSTANDING YOUR INSTRUMENT PANEL 317

NOTE:• The vehicle must be equipped with an automatictransmission to be equipped with Remote Start.• Obstructions between the vehicle and RKE transmit

INSTRUMENT CLUSTER DESCRIPTIONS1. TachometerIndicates the engine speed in revolutions per minute(RPM x 1000).2. High Beam IndicatorIndicates that head

When the appropriate conditions exist, this displayshows the Electronic Vehicle Information Center (EVIC)messages. Refer to “Electronic Vehicle Inform

WARNING!Driving a vehicle with the red brake light on isdangerous. Part of the brake system may have failed.It will take longer to stop the vehicle. Y

brakes. If the ABS light does not turn on when theignition switch is turned to the ON/RUN position, havethe light inspected by an authorized dealer.8.

10. SpeedometerIndicates vehicle speed.11. Seat Belt Reminder LightWhen the ignition switch is first turned to theON/RUN position, this light will tur

possible, and inflate them to the proper pressure. Drivingon a significantly under-inflated tire causes the tire tooverheat and can lead to tire failu

CAUTION! (Continued)equipped on your vehicle. Undesirable system opera-tion or sensor damage may result when using re-placement equipment that is not

WARNING!A hot engine cooling system is dangerous. You orothers could be badly burned by steam or boilingcoolant. You may want to call an authorized de

CAUTION!Prolonged driving with the Malfunction IndicatorLight (MIL) on could cause damage to the enginecontrol system. It also could affect fuel econo

This system allows the driver to select a variety of usefulinformation by pressing the switches mounted on thesteering wheel. The EVIC consists of the

WARNING!• Do not start or run an engine in a closed garage orconfined area. Exhaust gas contains Carbon Mon-oxide (CO) which is odorless and colorless

The system allows the driver to select information bypressing the following buttons mounted on the steeringwheel:• UP Arrow ButtonPress and release th

• BACK/LEFT Arrow ButtonPress and release the LEFT arrow button toaccess the information screens or sub-menuscreens of a main menu item.• OK ButtonPre

If the light remains on when the parking brake has beendisengaged, and the fluid level is at the full mark on themaster cylinder reservoir, it indicat

Operation of the Brake Warning Light can be checked byturning the ignition switch from the OFF position to theON/RUN position. The light should illumi

messages that consist of approximately 60 possible warn-ing or information messages. These pop up messages fallinto several categories:• Five Second S

5. Lane Departure Warning (LDW) — If EquippedThe Lane Departure Warning (LDW) systemprovides the driver with visual and steeringtorque warnings when t

The dual brake system provides a reserve braking capac-ity in the event of a failure to a portion of the hydraulicsystem. A leak in either half of the

The light also will turn on when the parking brake isapplied with the ignition switch in the ON/RUN posi-tion.NOTE: This light shows only that the par

WARNING!If you continue operating the vehicle when theTransmission Temperature Warning Light is illumi-nated you could cause the fluid to boil over, c

11. Dedicated Speed Warning Telltale — If EquippedThis area displays the dedicated speed warn-ing telltale.12. Speed For Electronic Cruise Control Set

To Enter Remote Start ModePress and release the REMOTE START button onthe RKE transmitter twice within five seconds.The vehicle doors will lock, the p

14. Reconfigurable Telltale Display• Power Steering System Over Temperature — IfEquippedIf the “POWER STEERING SYSTEM OVERTEMP” message and a icon are

• Oil Pressure Warning LightThis light indicates low engine oil pressure. Thelight should turn on momentarily when the engineis started. If the light

required. You may experience reduced performance, anelevated/rough idle or engine stall and your vehicle mayrequire towing.• Oil Temperature Warning L

CAUTION! (Continued)“H” pull over and stop the vehicle. Idle the vehiclewith the air conditioner turned off until the pointerdrops back into the norma

1. Lane Departure Warning (LDW)The Lane Departure Warning (LDW) systemprovides the driver with visual and steeringtorque warnings when the vehicle sta

If the light remains on when the parking brake has beendisengaged, and the fluid level is at the full mark on themaster cylinder reservoir, it indicat

Operation of the Brake Warning Light can be checked byturning the ignition switch from the OFF position to theON/RUN position. The light should illumi

Examples of this message type are “Turn Signal On”(if a turn signal is left on) and “Lights On” (if driverleaves the vehicle).• Unstored Messages Unti

9. Reconfigurable Telltale Area• Hill Descent Indicator — If EquippedThe symbol illuminates (is armed) when the4WD Low switch is activated and the tra

11. Instructional AreaThis area will display text to the visual warnings (i.e.,“Push Brake To Start”).12. Amber Reconfigurable Telltale Display• Trans

To Exit Remote Start Mode And Drive The VehicleBefore the end of 15 minute cycle, press and release theUNLOCK button on the RKE transmitter to unlock

• Rear Axle Lock Indicator — If EquippedThis light indicates when the rear axle lock hasbeen activated.• Low Coolant Level IndicatorThis telltale will

• LaneSense Service — If EquippedThis telltale will turn on to indicate that theLane Sense Departure has detected a failure.• Loose Fuel Filler Cap Me

• Temperature GaugeThe temperature gauge shows engine coolant tem-perature. Any reading within the normal range indi-cates that the engine cooling sys

14. Red Reconfigurable Telltale Display• Engine Temperature Warning LightThis light warns of an overheated engine condi-tion. As temperatures rise and

NOTE:• Even if power steering assistance is no longer opera-tional, it is still possible to steer the vehicle. Underthese conditions there will be a s

If jump starting is required, refer to “Jump StartingProcedures” in “What To Do In Emergencies”.• Electronic Throttle Control (ETC) LightThis light in

Unless reset, this message will continue to display eachtime you turn the ignition switch to the ON/RUNposition or cycle the ignition to the ON/RUN po

SPress the ADAPTIVE CRUISE CONTROL (ACC) ON/OFF button (located on the steering wheel) until one ofthe following displays in the EVIC:Adaptive Cruise

• Passenger Seatbelt Unbuckled• Service Airbag System• Traction Control Off• Washer Fluid Low• Oil Pressure Low• Oil Change Due• Fuel Low• Service Ant

• Key in Ignition• Key in Ignition Lights On• Remote Start Active Key to Run• Remote Start Active Push Start Button• Remote Start Aborted Fuel Low• Re

DOOR LOCKSManual Door LocksTo lock each door, rotate the door lock knob on each doortrim panel forward. To unlock the front doors, pull theinside door

• Transmission Cool Ready to Drive• Service Transmission• Service Shifter• Engage Park Brake to Prevent Rolling• Transmission Too cold Idle with Engin

Transmission Temperature – Automatic TransmissionOnlyOil TempCoolant TemperatureOil LifeBattery VoltageTire PressurePress and release the UP or DOWN a

Fuel EconomyPress and release the UP or DOWN arrowbutton until the Fuel Economy icon ishighlighted.• Average Fuel Economy/Miles Per Gallon (MPG orL/10

Screen SetupPress and release the UP or DOWN arrowbutton until the Screen Setup display icon ishighlighted in the EVIC. Press and release theOK button

Upper Right• None• Compass (default setting)• Outside Temp• Oil Temp• Time• Range To Empty (RTE)• Average MPG• Current MPG• Trip A• Trip BRestore To D

• Trip B• Audio Information• Menu Title (Default Setting)Uconnect® SETTINGSThe Uconnect® system uses a combination of soft andhard keys located on the

Hard-KeysHard-Keys are located below the Uconnect® system inthe center of the instrument panel. In addition, there is aScroll/Enter control knob locat

Soft-KeysSoft-Keys are accessible on the Uconnect® display.Customer Programmable Features — Uconnect®5.0/8.4 SettingsPress the Apps soft-key, then pre

• Display Brightness With Headlights ONWhen in this display, you may select the brightness withthe headlights on. Adjust the brightness with the + and

• Touchscreen BeepWhen in this display, you may turn on or shut off thesound heard when a touch screen button (soft-key) ispressed. Touch the Touchscr

WARNING! (Continued)• Do not leave the Key Fob in or near the vehicle, orin a location accessible to children, and do notleave the ignition of a vehic

• Set Time MinutesWhen in this display, you may adjust the minutes. TheSync with GPS Time soft-key must be unchecked. Tomake your selection, touch the

• Forward Collision Warning (FCW) Active Braking —If EquippedThe FCW system includes Advanced Brake Assist (ABA).When this feature is selected, it wil

• ParkSense® Active Park Assist — If EquippedThe Rear Park Assist system will scan for objects behindthe vehicle when the transmission shift lever is

Refer to “ParkSense® Rear Park Assist” in “Understand-ing The Features Of Your Vehicle” for system functionand operating information.• Tilt Mirrors In

image of the rear surroundings of your vehicle wheneverthe shift lever is put into REVERSE. The image will bedisplayed on the radio touchscreen displa

setting, showing that setting has been selected. Touch theback arrow soft-key to return to the previous menu.• Electric Park Brake Service ModeThis fe

The headlights will also turn off when the wipers areturned off if they were turned on by this feature. To makeyour selection, touch the Headlights Wi

• Flash Headlights With LockWhen this feature is selected, the headlights will flashwhen the doors are locked or unlocked with the RemoteKeyless Entry

• Sound Horn With Remote StartWhen this feature is selected, the horn will sound whenthe remote start is activated. To make your selection,touch the S

return to the previous menu. Refer to “Keyless Enter-N-Go™” in “Things To Know Before Starting Your Vehicle”.• Memory To FOB — If EquippedThis feature

If you press the power door lock switch while theignition is in the ACC or ON/RUN position, and anyfront door is open, the power locks will not operat

Seats soft-key, until a check-mark appears next to setting,showing that setting has been selected. Touch the backarrow soft-key to return to the previ

NOTE: Keep magnetic materials away from the top of theinstrument panel, such as iPod’s, Mobile Phones, LaptopComputers and Radar Detectors. This is wh

• EqualizerWhen in this display you may adjust the Bass, Mid andTreble settings. Adjust the settings with the + and –setting soft-keys or by selecting

Radio SetupAfter pressing the Radio Setup soft-key the followingsettings will be available.• Traffic AnnouncementWhen this feature is selected it allo

Clear Personal DataAfter pressing the Clear Personal Data Settings soft-keythe following settings will be available:• Clear Personal DataWhen this fea

Located in the front storage area, this feature allows aniPod® or external USB device to be plugged into the USBport.iPod® control supports Mini, 4G,

Pressing the center button will make the radio switchbetween the various modes available (AM/FM/SXM/CD/AUX, etc.).The left-hand control is a rocker-ty

CD/DVD DISC MAINTENANCETo keep a CD/DVD in good condition, take the followingprecautions:1. Handle the disc by its edge; avoid touching thesurface.2.

CLIMATE CONTROLSThe air conditioning and heating system is designed tomake you comfortable in all types of weather. Thissystem can be operated through

Front Blower ControlThere are seven blower speeds. Usethis control to regulate the amount ofair forced through the system in anymode you select. The b

Child-Protection Door Lock System — Rear DoorsTo provide a safer environment for small children ridingin the rear seats, the rear doors are equipped w

MAX A/CFor maximum cooling, when MAX A/C is selected theA/C is turned on automatically and the air isrecirculated.NOTE: A/C cannot be deselected when

Bi-Level ModeAir is directed through the panel and floor outlets.NOTE: There is a difference in temperature (in anyconditions other than full cold or

Recirculation ControlPress this button to choose between outside air intake orrecirculation of the air inside the vehicle. A LED willilluminate when y

Economy ModeIf ECONOMY mode is desired, press the A/C button toturn off the LED indicator and the A/C compressor.Rotate the temperature control knob t

Soft-KeysSoft-keys are accessible on the Uconnect® system screen.Uconnect® 5.0 Manual Temperature Controls —Soft-keysUconnect® 8.4 Manual Temperature

Button Descriptions (Applies To Both Hard-keys AndSoft-keys)1. MAX A/C ButtonPress and release to change the current setting, theindicator illuminates

CAUTION!Failure to follow these cautions can cause damage tothe heating elements:•Use care when washing the inside of the rearwindow. Do not use abras

7. ModesThe airflow distribution mode can be adjusted so aircomes from the instrument panel outlets, floor outlets,demist outlets and defrost outlets.

NOTE: The air conditioning compressor operates in MIXand DEFROST modes even if the A/C button is notpressed. This dehumidifies the air to help dry the

Automatic Climate Controls With Touch-Screen —If EquippedHard-KeysThe hard-keys located below the Uconnect® screen.Soft-KeysSoft-keys are accessible o

NOTE:• When the child lock system is engaged, the door canbe opened only by using the outside door handle eventhough the inside door lock is in the un

Button Descriptions (Applies To Both Hard-keys AndSoft-keys)1. MAX A/C ButtonPress and release to change the current setting, theindicator illuminates

6. Rear Defrost ButtonPress and release this button to turn on the rear windowdefroster and the heated outside mirrors (if equipped). Anindicator will

8. Passenger Temperature Control Down ButtonProvides the passenger with independent temperaturecontrol. Push the hard-key button for cooler temperatur

11. ModesThe airflow distribution mode can be adjusted so aircomes from the instrument panel outlets, floor outlets,demist outlets and defrost outlets

12. Climate Control OFF ButtonPress and release this button to turn the Climate ControlON/OFF.13. Driver Temperature Control Down ButtonProvides the d

NOTE:• If fog or mist appears on the windshield or side glass,select Defrost mode and increase blower speed.• If your air conditioning performance see

NOTE: In cold weather, use of Recirculation mode maylead to excessive window fogging. The recirculationfeature may be unavailable (soft button greyed

NOTE:• It is not necessary to move the temperature settings forcold or hot vehicles. The system automatically adjuststhe temperature, mode, and blower

Operating TipsNOTE: Refer to the chart at the end of this section forsuggested control settings for various weather condi-tions.Summer OperationThe en

NOTE:• Recirculate without A/C should not be used for longperiods, as fogging may occur.• Automatic Temperature Controls (ATC) will automati-cally adj

NOTE:• Passive Entry may be programmed ON/OFF; refer to“Uconnect® Settings” in “Understanding Your Instru-ment Panel” for further information.• If wea

Control Setting Suggestions for Various Weather Conditions408 UNDERSTANDING YOUR INSTRUMENT PANEL

STARTING AND OPERATINGCONTENTS䡵 STARTING PROCEDURES ...414▫ Normal Starting...414▫ Extreme Cold Weather (Below –20°F

▫ SRear Electronic Locker (E-Locker) System – IfEquipped ...436䡵 SELEC-TERRAIN™ ...437▫ Description ...

▫ Electronic Stability Control (ESC) ...466▫ ESC Activation/Malfunction Indicator Light AndESC OFF Indicator Light ...470▫ Trailer

䡵 TIRE PRESSURE MONITOR SYSTEM (TPMS) . .500▫ Base System ...503▫ Premium System – If Equipped...506▫ General Informati

▫ Towing This Vehicle Behind Another Vehicle . .534▫ Recreational Towing — Front-Wheel Drive (FWD)Models ...535▫ Recreationa

STARTING PROCEDURESBefore starting your vehicle, adjust your seat, adjust bothinside and outside mirrors, and fasten your seat belts.WARNING!• When le

within 10 seconds, turn the ignition switch to the LOCKposition, wait 10 to 15 seconds, then repeat the “NormalStarting” procedure.Tip Start FeatureTu

If Engine Fails To StartWARNING!• Never pour fuel or other flammable liquid into thethrottle body air inlet opening in an attempt to startthe vehicle.

switch to the LOCK position, wait 10 to 15 seconds, thenrepeat the “Normal Starting” procedure.CAUTION!To prevent damage to the starter, wait 10 to 15

To Unlock From The Passenger SideWith a valid Passive Entry RKE transmitter within 5 ft(1.5 m) of the passenger door handle, grab the frontpassenger d

CAUTION! (Continued)• Shift into or out of REVERSE only after the vehiclehas come to a complete stop and the engine is atidle speed.• Do not shift bet

WARNING! (Continued)• Never leave children alone in a vehicle, or withaccess to an unlocked vehicle. Allowing children tobe in a vehicle unattended is

Brake/Transmission Shift Interlock SystemThis vehicle is equipped with a Brake Transmission ShiftInterlock system (BTSI) that holds the shift lever in

Operation⬙ in this section for further information). Mov-ing the shift lever into the ERS (-/+) position (beside theDRIVE position) displays the curre

When parking on a hill, apply the parking brake beforeshifting the transmission to PARK, otherwise the load onthe transmission locking mechanism may m

WARNING! (Continued)• Unintended movement of a vehicle could injurethose in or near the vehicle. As with all vehicles,you should never exit a vehicle

CAUTION!• Before moving the shift lever out of PARK, youmust place the ignition from the LOCK/OFF posi-tion to the ON/RUN position, and also press the

WARNING!Do not coast in NEUTRAL and never turn off theignition to coast down a hill. These are unsafepractices that limit your response to changing tr

If the transmission operating temperature exceeds nor-mal operating limits, the transmission controller maymodify the transmission shift schedule, red

to operate. The Malfunction Indicator Light (MIL) may beilluminated. Limp Home Mode allows the vehicle to bedriven to an authorized dealer for service

NOTE: The vehicle will only unlock the doors when avalid Passive Entry RKE transmitter is detected inside thevehicle, and no valid Passive Entry RKE t

Moving the shift lever to the ERS position (besideDRIVE) will activate ERS mode, display the current gearin the instrument cluster, and maintain that

Additionally, on dry pavement under heavy throttleinput (where one may have no wheel spin), torque will besent to the rear in a pre-emptive effort to

2–Speed Four-Wheel Drive (4WD) — If EquippedThe Four-Wheel Drive is fully automatic in the normaldriving mode. The Selec-Terrain buttons provide three

When additional traction is required, the 4WD LOWrange position can be used to provide an additional gearreduction which allows for increased torque t

WARNING!You or others could be injured if you leave thevehicle unattended with the power transfer unit inthe NEUTRAL (N) position without first fully

NOTE: If shift conditions/interlocks are not met a mes-sage will flash from the Electronic Vehicle InformationCenter (EVIC) with instructions on how t

• Shifting into or out of 4WD LOW is possible with thevehicle completely stopped; however, difficulty mayoccur due to the mating clutch teeth not bein

6.Using a ballpoint pen or similar object, press and hold therecessed power transfer unit NEUTRAL (N) button (lo-cated above the selector switch) for

Rear Electronic Locker (E-Locker) System – IfEquippedThe Rear E-Locker System features a mechanical lockingrear differential to provide better tractio

• When disengaging Rear E-Locker, the indicator lightsin the instrument cluster and on the REAR LOCKbutton will begin to flash. When the shift is comp

NOTE: If “Unlock All Doors 1st Press” is programmed inEVIC, all doors will unlock when you push the electronicliftgate release. If ⬙Unlock Driver Door

Selec-Terrain™ offers the following modes:• Auto – Fully automatic full time four-wheel driveoperation can be used on and off road. Balancestraction w

• Rock – Off-road calibration only available in 4WDLOW range. Traction based tuning with improvedsteer-ability for use on high traction off-road surfa

OFF-ROAD DRIVING TIPSWhen To Use 4WD LOW RangeWhen off-road driving, shift to 4WD LOW for additionaltraction and control on slippery or difficult terr

Flowing WaterIf the water is swift flowing and rising (as in stormrun-off) avoid crossing until the water level recedesand/or the flow rate is reduced

Avoid abrupt downshifts on icy or slippery roads be-cause engine braking may cause skidding and loss ofcontrol.Hill ClimbingNOTE: Before attempting to

Traction DownhillShift the transmission into a low gear and the 4WDSystem to 4WD LOW range or Select Hill DescentControl if equipped (refer to ⬙Electr

WARNING!Abrasive material in any part of the brakes may causeexcessive wear or unpredictable braking. You mightnot have full braking power when you ne

NOTE:• Even if the power steering assistance is no longeroperational, it is still possible to steer the vehicle.Under these conditions there will be a

To apply the parking brake manually, pull up on theswitch momentarily. You may hear a slight whirringsound from the back of the vehicle while the park

To release the park brake manually, the ignition switchmust be ON. Put your foot on the brake pedal, then pushthe parking brake switch down momentaril

NOTE:• After pressing the door handle LOCK button, youmust wait two seconds before you can lock or unlockthe doors, using either Passive Entry door ha

WARNING! (Continued)• Do not leave the key fob in or near the vehicle, orin a location accessible to children, and do notleave a vehicle equipped with

reaches approximately 3 mph, the parking brake willremain engaged.WARNING!Driving the vehicle with the parking brake engaged,or repeated use of the pa

Safehold can be temporarily bypassed by pressing theElectric Park Brake Switch while the driver door is open.Once manually bypassed, Safehold will be

WARNING!You can be badly injured working on or around amotor vehicle. Do only that service work for whichyou have the knowledge and the right equipmen

WARNING!• Pumping of the Anti-Lock Brakes will diminishtheir effectiveness and may lead to a collision.Pumping makes the stopping distance longer. Jus

• Engines may idle at higher speeds during warm-up,which could cause rear wheels to spin and result inloss of vehicle control. Be especially careful w

Anti-Lock Brake System (ABS)This system aids the driver in maintaining vehicle controlunder adverse braking conditions. The system controlshydraulic b

or the “Full Off” mode. Refer to “Electronic StabilityControl (ESC)” in this section for further information.Brake Assist System (BAS)The BAS is desig

applies the appropriate brake and may also reduceengine power to lessen the chance that wheel lift willoccur. ERM will only intervene during very seve

The following conditions must be met in order for HSA toactivate:• The vehicle must be stopped.• The vehicle must be on a 7% (approximate) grade orgre

WINDOWSPower WindowsThe window controls on the driver’s door control all thedoor windows.There are single window controls on each passenger doortrim p

Towing With HSAHSA will provide assistance during acceleration on anincline while towing a trailer.WARNING!• If you use a trailer brake controller wit

Hill Descent Control (HDC) — If EquippedHDC is intended for low speed off road driving while in4WD Low Range. HDC maintains vehicle speed whiledescend

Activating HDCOnce HDC is enabled it will activate automatically ifdriven down a grade of sufficient magnitude (greaterthan approximately 8%). The set

Deactivating HDCHDC will be deactivated but remain available if any ofthe following conditions occur:• Driver overrides HDC set speed with throttle or

• The cluster icon and switch lamp will flash for severalseconds then extinguish when the driver presses theHDC switch but enable conditions are not m

Enabling SSCSSC is enabled by pressing the SSC switch, but thefollowing conditions must also be met to enable SSC:• Driveline is in 4WD Low Range• Veh

• 7th= 4.3 mph (7 km/h)• 8th = 5 mph (8 km/h)• 9th = 5.6 mph (9 km/h)• REVERSE = .6 mph (1 km/h)• NEUTRAL = 1.2 mph (2 km/h)• PARK = SSC remains enabl

Deactivating SSCSSC will be deactivated but remain available if any of thefollowing conditions occur:• Driver overrides SSC set speed with throttle or

• The cluster icon and switch lamp will flash for severalseconds then extinguish when the driver presses theSSC switch but enable conditions are not m

The “ESC Activation/Malfunction Indicator Light” lo-cated in the instrument cluster will start to flash as soonas the tires lose traction and the ESC

WARNING!Never leave children unattended in a vehicle, and donot let children play with power windows. Do notleave the key fob in or near the vehicle,

ESC On – Two-Wheel Drive Vehicles And Four-WheelDrive Vehicles In 2WD And 4WD High RangeThis is the normal operating mode for ESC when oper-ating a tw

WARNING!• When in “Partial Off” mode, the TCS functionalityof ESC, (except for the limited slip feature de-scribed in the TCS section), has been disab

NOTE:• “Full Off” is the only operating mode for ESC in 4WDLOW range. The ESC system will be in this modewhenever the vehicle is started in 4WD LOW ra

speeds greater than 30 mph (48 km/h), see your autho-rized dealer as soon as possible to have the problemdiagnosed and corrected.The “ESC Activation/M

appropriate wheel(s) to counteract the sway of the trailer.TSC will become active automatically once an excessivelyswaying trailer is recognized.Alway

Rain Brake Support (RBS)Rain Brake Support may improve braking performancein wet conditions. It will periodically apply a smallamount of brake pressur

TIRE SAFETY INFORMATIONTire MarkingsNOTE:• P (Passenger) - Metric tire sizing is based on U.S.design standards. P-Metric tires have the letter “P”mold

• Temporary spare tires are designed for temporaryemergency use only. Temporary high pressure com-pact spare tires have the letter “T” or “S” molded i

EXAMPLE:10.5 = Section width in inches (in)R = Construction code— ⬙R⬙ means radial construction— ⬙D⬙ means diagonal or bias construction15 = Rim diame

EXAMPLE:Load Identification:ⴖ...blank...ⴖ = Absence of any text on the sidewall of the tire indicates a Standard Load (SL) tireExtra Load (XL) = Ext

NOTE:• If the window runs into any obstacle during auto-closure, it will reverse direction and then go backdown. Remove the obstacle and use the windo

EXAMPLE:DOT MA L9 ABCD 0301DOT = Department of Transportation— This symbol certifies that the tire is in compliance with the U.S. Department of Transp

Tire Terminology And DefinitionsTerm DefinitionB-Pillar The vehicle B-Pillar is the structural member of the body locatedbehind the front door.Cold Ti

Tire Loading And Tire PressureTire And Loading Information Placard LocationNOTE: The proper cold tire inflation pressure is listed onthe driver’s side

Tire And Loading Information PlacardThis placard tells you important information about the:1) Number of people that can be carried in the ve-hicle.2)

LoadingThe vehicle maximum load on the tire must not exceedthe load carrying capacity of the tire on your vehicle. Youwill not exceed the tire’s load

4. The resulting figure equals the available amount ofcargo and luggage load capacity. For example, if“XXX” amount equals 1,400 lbs (635 kg) and there

484 STARTING AND OPERATING

WARNING!Overloading of your tires is dangerous. Overloadingcan cause tire failure, affect vehicle handling, andincrease your stopping distance. Use ti

WARNING! (Continued)• Unequal tire pressures from one side of the vehicleto the other can cause the vehicle to drift to theright or left.• Always driv

• Inspect tires for signs of tire wear or visible damage.CAUTION!After inspecting or adjusting the tire pressure, al-ways reinstall the valve stem cap

Window Lockout SwitchThe window lockout switch on the driver’s door trimpanel allows you to disable the window controls on therear passenger doors. To

loading may be required for high-speed vehicle opera-tion. Refer to your authorized tire dealer or originalequipment vehicle dealer for recommended sa

• The puncture is no greater than ¼⬙ (6 mm).Consult an authorized tire dealer for tire repairs andadditional information.Damaged Run Flat tires, or Ru

If you need snow tires, select tires equivalent in size andtype to the original equipment tires. Use snow tires onlyin sets of four; failure to do so

Spare Tires – If EquippedNOTE: For vehicles equipped with TIREFIT instead of aspare tire, please refer to “TIREFIT KIT” in “What To DoIn Emergencies”

wheel is designed specifically for the compact spare tire.Do not install more than one compact spare tire andwheel on the vehicle at any given time.WA

WARNING!Limited-use spares are for emergency use only. In-stallation of this limited-use spare tire affects vehiclehandling. With this tire, do not dr

These indicators are molded into the bottom of the treadgrooves. They will appear as bands when the tread depthbecomes 1/16 in (2 mm). When the tread

WARNING!Tires and the spare tire should be replaced after sixyears, regardless of the remaining tread. Failure tofollow this warning can result in sud

WARNING!• Do not use a tire, wheel size or rating other thanthat specified for your vehicle. Some combinationsof unapproved tires and wheels may chang

• Use on Front Tires Only• Due to limited clearance, the following traction de-vices are recommended:Front Wheel Drive (FWD) Models• Original equipmen

INTRODUCTIONCONTENTS䡵 INTRODUCTION ...4䡵 ROLLOVER WARNING ...4䡵 HOW TO USE THIS MANUAL ...5䡵 WARNINGS

Wind BuffetingWind buffeting can be described as the perception ofpressure on the ears or a helicopter-type sound in theears. Your vehicle may exhibit

CAUTION! (Continued)• Damage to Four Wheel Drive (4WD) TrailhawkModels may result if tire chains or traction devicesare used with original equipment s

TIRE ROTATION RECOMMENDATIONSThe tires on the front and rear of your vehicle operate atdifferent loads and perform different steering, handling,and br

CAUTION!Proper operation of four-wheel drive vehicles de-pends on tires of equal size, type and circumferenceon each wheel. Any difference in tire siz

in “Starting and Operating” for information on how toproperly inflate the vehicle’s tires. The tire pressure willalso increase as the vehicle is drive

CAUTION!• The TPMS has been optimized for the originalequipment tires and wheels. TPMS pressures andwarning have been established for the tire sizeequ

• Driving on a significantly under-inflated tire causesthe tire to overheat and can lead to tire failure.Under-inflation also reduces fuel efficiency

Tire Pressure Monitoring Low Pressure WarningsThe “Tire Pressure Monitoring Telltale Light” willilluminate in the instrument cluster, a “LOW TIREPRESS

4. Using tire chains on the vehicle.5. Using wheels/tires not equipped with TPMS sensors.Vehicles With Full-Size Spare1. The matching full-size spare

5. Once you repair or replace the original road tire andreinstall it on the vehicle in place of the compact spare,the TPMS will update automatically a

Tire Pressure Monitoring Low Pressure WarningsThe “Tire Pressure Monitoring Telltale Light” willilluminate in the instrument cluster and a chimewill s

NOTE: Use the power door LOCK switch on either frontdoor trim panel or the Remote Keyless Entry (RKE)transmitter to lock and unlock the liftgate. The

values in the graphic display in the EVIC will return totheir original color, and the “Tire Pressure MonitoringTelltale Light” will turn off. The vehi

If the ignition key is cycled, this sequence will repeat,providing the system fault still exists. If the system faultno longer exists, the “Tire Press

4. The EVIC will display a graphic showing the tirepressure value in the same color as the other pressurevalues in place of the different color low ti

low-pressure warning limit in any of the four activeroad tires. The vehicle may need to be driven for up to20 minutes above 15.5 mph (25 km/h) in orde

consistent gasoline specifications (the Worldwide FuelCharter, WWFC) which define fuel properties necessaryto deliver enhanced emissions, performance,

Gasoline/Oxygenate BlendsSome fuel suppliers blend unleaded gasoline with oxy-genates such as Ethanol. Fuels blended with oxygenatesmay be used in you

• Disconnect and reconnect the battery to reset theengine controller memory.More extensive repairs will be required for prolongedexposure to E-85 fuel

CAUTION! (Continued)• An out-of-tune engine or certain fuel or ignitionmalfunctions can cause the catalytic converter tooverheat. If you notice a pung

WARNING! (Continued)• Guard against carbon monoxide with proper main-tenance. Have the exhaust system inspected everytime the vehicle is raised. Have

2. Open the fuel filler door, and remove the fuel fillercap.NOTE:• In certain cold conditions, ice may prevent the fueldoor from opening. If this occu

The power liftgate may also be opened or closed bypressing the LIFTGATE button located on the frontoverhead console, or closed by pressing the LIFTGAT

WARNING!• Never have any smoking materials lit in or near thevehicle when the gas cap is removed or the tank isbeing filled.• Never add fuel when the

VEHICLE LOADINGCertification LabelAs required by National Highway Traffic Safety Admin-istration regulations, your vehicle has a certification labelaf

Tire SizeThe tire size on the Vehicle Certification Label representsthe actual tire size on your vehicle. Replacement tiresmust be equal to the load c

items down low and be sure that the weight is distributedequally. Stow all loose items securely before driving.Improper weight distributions can have

exceed the GVWR. Refer to “Vehicle Loading/VehicleCertification Label” in “Starting and Operating” forfurther information.Gross Trailer Weight (GTW)Th

WARNING!It is important that you do not exceed the maximumfront or rear GAWR. A dangerous driving conditioncan result if either rating is exceeded. Yo

Weight-Distributing HitchA weight-distributing system works by applying lever-age through spring (load) bars. They are typically usedfor heavier loads

Trailer Hitch ClassificationThe following chart provides the industry standard forthe maximum trailer weight a given trailer hitch class cantow and sh

Trailer Towing Weights (Maximum Trailer WeightRatings)The following chart provides the maximum trailerweight ratings towable for your given drivetrain

Trailer And Tongue WeightAlways load a trailer with 60% to 65% of the weight inthe front of the trailer. This places 10% to 15% of theGross Trailer We

NOTE:• The power liftgate buttons will not operate if thevehicle is in gear or the vehicle speed is above 0 mph(0 km/h).• The power liftgate will not

NOTE: Remember that everything put into or on thetrailer adds to the load on your vehicle. Also, additionalfactory-installed options or dealer-install

WARNING! (Continued)• When hauling cargo, or towing a trailer, do notoverload your vehicle or trailer. Overloading cancause a loss of control, poor pe

• Check the trailer tires for proper tire inflation pres-sures before trailer usage.• Check for signs of tire wear or visible tire damagebefore towing

WARNING!• Do not connect trailer brakes to your vehicle’shydraulic brake lines. It can overload your brakesystem and cause it to fail. You might not h

Four-Pin Connector1 — Female Pins 4 — Park2 — Male Pin 5 — Left Stop/Turn3 — Ground 6 — Right Stop/TurnSeven-Pin Connector1 — Battery 5 — Ground2 — Ba

Towing TipsBefore setting out on a trip, practice turning, stopping,and backing the trailer in an area located away fromheavy traffic.Automatic Transm

RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.)Towing This Vehicle Behind Another Vehicle4WD ModelsTowing ConditionWheel OFF theGroundFront-Wheel Drive(F

Recreational Towing — Front-Wheel Drive (FWD)ModelsAutomatic Transmission - If EquippedDO NOT flat tow this vehicle. Damage to the drivetrainwill resu

CAUTION!Towing this vehicle in violation of the above require-ments can cause severe engine and/or transmissiondamage. Damage from improper towing is

CAUTION!• DO NOT dolly tow any 4WD vehicle. Internaldamage to the transmission or power transfer unitwill occur if a dolly is used when recreationalto

• If your liftgate is power closing and you put thevehicle in gear, the liftgate will continue to powerclose. However, vehicle movement may result in

WARNING! (Continued)position disengages both the front and rear drive-shafts from the powertrain and will allow the vehicleto move, even if the transm

7. After the shift is completed and the NEUTRAL (N)light stays on, release the NEUTRAL (N) button.8. Start the engine.9. Shift the transmission into R

NOTE:• Steps 1 through 5 are requirements that must be metprior to pressing the NEUTRAL (N) button, and mustcontinue to be met until the shift has bee

6. Using a ballpoint pen or similar object, press and holdthe recessed power transfer unit NEUTRAL (N) button(located by the selector switch) for one

13. Press and hold the brake pedal.14. Release the parking brake.15. Shift the transmission into DRIVE, release the brakepedal, and check that the veh

WHAT TO DO IN EMERGENCIESCONTENTS䡵 HAZARD WARNING FLASHERS ...545䡵 IF YOUR ENGINE OVERHEATS ...545䡵 WHEEL AND TIRE TORQUESPECIFICATIO

䡵 TOWING A DISABLED VEHICLE ...575▫ Front-Wheel Drive (FWD) Models ...577▫ 4x4 Models With 1–Speed PowerTransfer Unit...

HAZARD WARNING FLASHERSThe Hazard Warning flasher switch is located in theswitch bank below the radio screen.Press the switch to turn on the Hazard Wa

NOTE: There are steps that you can take to slow downan impending overheat condition:• If your air conditioner (A/C) is on, turn it off. The A/Csystem

Tighten the lug nuts/bolts in a star pattern until eachnut/bolt has been tightened twice.After 25 miles (40 km) check the lug nut/bolt torque to besur

• Front seat belts incorporate pretensioners that mayenhance occupant protection by managing occupantenergy during an impact event• All seat belt syst

WARNING!To avoid the risk of forcing the vehicle off the jack,do not tighten the lug nuts fully until the vehicle hasbeen lowered. Failure to follow t

TIREFIT Kit Components And Operation1. Sealant Bottle2. Deflation Button3. Pressure Gauge4. Power Button5. Mode Select Knob6. Sealant Hose (Clear)7. A

Selecting Sealant ModeTurn the Mode Select Knob (5) to thisposition to inject the TIREFIT Sealantand to inflate the tire. Use the SealantHose (clear h

• For optimum performance, make sure the valve stemon the wheel is free of debris before connecting theTIREFIT kit.• You can use the TIREFIT air pump

WARNING! (Continued)• Keep TIREFIT away from open flames or heatsource.• A loose TIREFIT kit thrown forward in a collisionor hard stop could endanger

kit when injecting the sealant into the deflated tire andrunning the air pump. Move the vehicle as necessaryto place the valve stem in this position b

NOTE: Sealant may leak out through the puncture in thetire.If the sealant (white fluid) does not flow within0–10seconds through the Sealant Hose (6):1

If the tire does not inflate to at least 26 psi (1.8 Bar)pressure within 15 minutes:• The tire is too badly damaged. Do not attempt to drivethe vehicl

(D) Drive Vehicle:Immediately after injecting sealant and inflating the tire,drive the vehicle 5 miles (8 km) or 10 minutes to ensuredistribution of t

If the tire pressure is 19 psi (1.3 Bar) or higher:1. Press the Power Button (4) to turn on TIREFIT andinflate the tire to the pressure indicated on t

WARNING!•Never place a rear facing infant seat in front of anair bag. A deploying Passenger Advanced Front AirBag can cause death or serious injury to

5. Position the new Sealant Bottle (1) in the housing sothat the Sealant Hose (6) aligns with the hose slot inthe front of the housing. Press the bott

WARNING! (Continued)• The jack is designed to be used as a tool forchanging tires only. The jack should not be used tolift the vehicle for service pur

4. Remove the chocks.5. Remove the scissors jack and wheel bolt wrench fromthe spare wheel as an assembly. Turn the jack screw tothe left to loosen th

WARNING!A loose tire or jack thrown forward in a collision orhard stop could endanger the occupants of the ve-hicle. Always stow the jack parts and th

Jacking InstructionsWARNING!Carefully follow these tire changing warnings tohelp prevent personal injury or damage to yourvehicle:• Always park on a f

CAUTION!Do not attempt to raise the vehicle by jacking onlocations other than those indicated in the JackingInstructions for this vehicle.1. Remove th

Jacking Locations Rear Jacking Location564 WHAT TO DO IN EMERGENCIES

Rear Jacking Engagement Point Front Jacking Location6WHAT TO DO IN EMERGENCIES 565

5. Raise the vehicle just enough to remove the flat tire.WARNING!Raising the vehicle higher than necessary can makethe vehicle less stable. It could s

NOTE:• For vehicles so equipped, do not attempt to install acenter cap or wheel cover on the compact spare.• Refer to “Compact Spare Tire” and to “Lim

5. If the air bag system in this vehicle needs to bemodified to accommodate a disabled person, contactthe Customer Center. Phone numbers are providedu

10. Lower the vehicle to the ground by turning the jackhandle counterclockwise.11. Finish tightening the wheel bolts. Push down on thewrench while at

WARNING!A loose tire or jack thrown forward in a collision orhard stop could endanger the occupants of the ve-hicle. Always stow the jack parts and th

5. After 25 miles (40 km) check the wheel bolt torquewith a torque wrench to ensure that all wheel bolts areproperly seated against the wheel.JUMP-STA

WARNING!• Take care to avoid the radiator cooling fan when-ever the hood is raised. It can start anytime theignition switch is ON. You can be injured

CAUTION!Failure to follow these procedures could result indamage to the charging system of the booster vehicleor the discharged vehicle.1. Connect the

8. Disconnect the opposite end of the positive (+) jumpercable from the positive (+) post of the booster battery.9. Disconnect the positive (+)end of

Use the least amount of accelerator pedal pressure thatwill maintain the rocking motion without spinning thewheels or racing the engine.NOTE: Press th

WARNING! (Continued)even failure, of the axle and tires. A tire couldexplode and injure someone. Do not spin your vehi-cle’s wheels faster than 30 mph

4X4 MODELSTowing Condition Wheels OFFthe GroundFWD MOD-ELS1–SPEEDPOWER TRANSFERUNIT2–SPEEDPOWER TRANSFERUNITFlat Tow NONE NOT AL-LOWEDNOT ALLOWED See

Proper towing or lifting equipment is required to preventdamage to your vehicle. Use only tow bars and otherequipment designed for this purpose, follo

WARNING! (Continued)• In a collision, you and your passengers can suffermuch greater injuries if you are not properly buck-led up. You can strike the

CAUTION!Towing this vehicle in violation of the above require-ments can cause severe transmission damage. Dam-age from improper towing is not covered

4x4 Models With 2–Speed Power Transfer UnitThe manufacturer recommends towing with all fourwheels OFF the ground.Acceptable methods are to tow the veh

MAINTAINING YOUR VEHICLECONTENTS䡵 ENGINE COMPARTMENT — 2.4L ...583䡵 ENGINE COMPARTMENT — 3.2L ...584䡵 ONBOARD DIAGNOSTIC SYSTEM — OBD II

▫ Brake System ...609▫ Automatic Transmission ...611▫ Sky Slider™ Top Care ...613▫ Appearance Care An

ENGINE COMPARTMENT — 2.4L1 — Air Cleaner Filter 5 — Power Distribution Center (Fuses)2 — Engine Coolant Pressure Cap 6 — Battery3 — Oil Fill Cap 7 — W

ENGINE COMPARTMENT — 3.2L1 — Engine Coolant Reservoir 5 — Washer Fluid Reservoir2 — Engine Oil Filter Access Cover 6 — Battery3 — Brake Fluid Reservoi

ONBOARD DIAGNOSTIC SYSTEM — OBD IIYour vehicle is equipped with a sophisticated onboarddiagnostic system called OBD II. This system monitorsthe perfor

Loose Fuel Filler Cap MessageIf the vehicle diagnostic system determines that the fuelfiller cap is loose, improperly installed, or damaged, a“gASCAP”

Your vehicle has a simple ignition key-actuated test,which you can use prior to going to the test station. Tocheck if your vehicle’s OBD II system is

WARNING!• Wearing a seat belt incorrectly is dangerous. Seatbelts are designed to go around the large bones ofyour body. These are the strongest parts

REPLACEMENT PARTSUse of genuine MOPAR® parts for normal/scheduledmaintenance and repairs is highly recommended to en-sure the designed performance. Da

MAINTENANCE PROCEDURESThe pages that follow contain the required maintenanceservices determined by the engineers who designed yourvehicle.Besides thos

regular intervals, such as every fuel stop. The best time tocheck the engine oil level is about five minutes after afully warmed up engine is shut off

American Petroleum Institute (API) Engine OilIdentification SymbolThis symbol means that the oil hasbeen certified by the AmericanPetroleum Institute

Engine Oil Viscosity (SAE Grade) – 3.2L EngineMOPAR® SAE 5W-20 engine oil or equivalent Pennzoil®or Shell Helix® is recommended for all operating tem-

NOTE: For best access to the oil filter, a drive on hoistshould be used instead of a chassis hoist.Engine Oil Filter SelectionThis manufacturer’s engi

Maintenance-Free BatteryYour vehicle is equipped with a maintenance-free battery.You will never have to add water, nor is periodic main-tenance requir

CAUTION!• It is essential when replacing the cables on thebattery that the positive cable is attached to thepositive post and the negative cable is at

WARNING!• Use only refrigerants and compressor lubricantsapproved by the manufacturer for your air condi-tioning system. Some unapproved refrigerants

However, the manufacturer recommends that air condi-tioning service be performed by authorized dealer orother service facilities using recovery and re

INTRODUCTIONCongratulations on selecting your new Chrysler GroupLLC vehicle. Be assured that it represents precisionworkmanship, distinctive styling,

3. When the belt is long enough to fit, insert the latchplate into the buckle until you hear a “click.”Pulling Out The Lap/Shoulder Belt Latch Plate I

Windshield Wiper BladesClean the rubber edges of the wiper blades and thewindshield periodically with a sponge or soft cloth and amild nonabrasive cle

NOTE: The rear wiper arm cannot be raised fully up-ward unless the pivot cap is raised first.2. Lift the rear wiper arm upward to raise the wiperblade

5. Lower the wiper blade and snap the pivot cap intoplace.Adding Washer FluidThe windshield and rear window washers share the samefluid reservoir. The

have an authorized technician inspect the complete ex-haust system and adjacent body areas for broken, dam-aged, deteriorated, or mispositioned parts.

CAUTION! (Continued)• Damage to the catalytic converter can result if yourvehicle is not kept in proper operating condition.In the event of engine mal

• Do not idle the engine with any spark plug wiresdisconnected or removed, such as when diagnostictesting, or for prolonged periods during very roughi

With the engine at normal operating temperature (butnot running), check the cooling system pressure cap forproper vacuum sealing by draining a small a

CAUTION!• Mixing of engine coolant (antifreeze) other thanspecified Organic Additive Technology (OAT) en-gine coolant (antifreeze), may result in engi

the same engine coolant (OAT coolant conforming toMS-12106) throughout the life of your vehicle.Please review these recommendations for using OrganicA

Cooling System Pressure CapThe cap must be fully tightened to prevent loss of enginecoolant (antifreeze), and to ensure that engine coolant(antifreeze

WARNING!•A belt that is buckled into the wrong buckle willnot protect you properly. The lap portion could ridetoo high on your body, possibly causing

Disposal Of Used Engine CoolantUsed ethylene glycol-based engine coolant (antifreeze) isa regulated substance requiring proper disposal. Checkwith you

If an examination of your engine compartment shows noevidence of radiator or hose leaks, the vehicle may besafely driven. The vapor will soon dissipat

WARNING!Riding the brakes can lead to brake failure andpossibly a collision. Driving with your foot resting orriding on the brake pedal can result in

WARNING! (Continued)• To avoid contamination from foreign matter ormoisture, use only new brake fluid or fluid that hasbeen in a tightly closed contai

CAUTION!Using a transmission fluid other than the manufac-turer’s recommended fluid may cause deteriorationin transmission shift quality and/or torque

CAUTION!If a transmission fluid leak occurs, visit your autho-rized dealer immediately. Severe transmission dam-age may occur. Your authorized dealer

General CleaningCareful vacuuming of the top before washing is helpfulin removing dust and other foreign particles.If Hand Washing:• Wash in partial s

Additional Cleaning ProcedureFor additional cleaning assistance in removing stubbornstains, apply MOPAR® Convertible Cloth Top Cleaner orequivalent to

road surfaces on which the vehicle is operated, extremehot or cold weather and other extreme conditions willhave an adverse effect on paint, metal tri

CAUTION!• Do not use abrasive or strong cleaning materialssuch as steel wool or scouring powder that willscratch metal and painted surfaces.•Use of po

4. Position the lap belt across your thighs, below yourabdomen. To remove slack in the lap belt portion, pullup a bit on the shoulder belt. To loosen

Wheel And Wheel Trim Care• All wheels and wheel trim, especially aluminum andchrome plated wheels, should be cleaned regularlywith a mild soap and wat

• For tough stains, apply MOPAR® Total Clean, or amild soap solution to a clean, damp cloth and removestain. Use a fresh, damp towel to remove soap re

solvents, detergents, or ammonia-based cleaners to cleanleather upholstery. Application of a leather conditioner isnot required to maintain the origin

When cleaning the rear view mirror, spray cleaner on thetowel or rag that you are using. Do not spray cleanerdirectly on the mirror.Cleaning Plastic I

WARNING! (Continued)• Before replacing a fuse, make sure that the ignitionis off and that all the other services are switched offand/or disengaged.WAR

Cavity BladeFuseCartridgeFuseDescriptionF06 — — Not UsedF07 15 AmpBlue—Powertrain ControlModule - PCMF08 25 AmpClear— Engine ControlModule (ECM)F09 —

Cavity BladeFuseCartridgeFuseDescriptionF21 — — Not UsedF22 5 AmpTan— Radiator FanF23 70 AmpTan—Body ControllerModule (BCM) -Feed 1F24 — — Not UsedF25

Cavity BladeFuseCartridgeFuseDescriptionF38 — 60 AmpYellowGlow Plugs - DieselOnly - If EquippedF39 — 40 AmpGreenHVAC Blower MotorF40 — 20 AmpBlueTrail

Cavity BladeFuseCartridgeFuseDescriptionF50 — 30 AmpPinkPower Liftgate - IfEquippedF51 — — Not UsedF52 — — Not UsedF53 — 30 AmpPinkBSM-ECU & Valve

Cavity BladeFuseCartridgeFuseDescriptionF57 20 AmpYellow— Fuel Pump MotorF58 10 AmpRed— Occupant Classifica-tion ModuleF59 — — Not UsedF60 20 AmpYello

6. To release the belt, push the red button on the buckle.The belt will automatically retract to its stowed posi-tion. If necessary, slide the latch p

Cavity BladeFuseCartridgeFuseDescriptionF67 — — Not UsedF68 — — Not UsedF69 10 AmpRed— Power Transfer UnitSwitch (TSBM) /Active Grill Shutter(AGS) - I

Cavity BladeFuseCartridgeFuseDescriptionF77 10 AmpRed— Fuel Door Release/Brake Pedal SwitchF78 10 AmpRed— Diagnostic Port /Steering ColumnControl Modu

Cavity BladeFuseCartridgeFuseDescriptionF88 15 AmpBlue— Collision MitigationModule (CMM) /ElectrochromaticMirror / SmartCamera Module - IfEquippedF89

Cavity BladeFuseCartridgeFuseDescriptionF97 10 AmpRed— Occupant RestraintController (ORC)F98 25 AmpClear— Audio Amplifier - IfEquippedF99 — 30 AmpPink

Cavity Blade Fuse DescriptionF51 10 AmpRedDriver Window Switch/Power Mirrors – IfEquippedF53 7.5 AmpBrownUCI Port (USB & AUX)F89 10 AmpRedDoor Loc

REPLACEMENT BULBSInterior BulbsBulb NumberCargo Lamp TL212–2Overhead Console Lamp PLW214–2AReading Lamp WL212–2Exterior BulbsBulb NumberLow Beam/High

BULB REPLACEMENTNOTE: Lens fogging can occur under certain atmo-spheric conditions. This will usually clear as atmosphericconditions change to allow t

3. Firmly grasp the cap and rotate it counterclockwise tounlock it.4. Firmly grasp the bulb and connector assembly androtate counterclockwise to remov

4. Install the bulb and socket assembly into the housing,and rotate the socket clockwise to lock it in place.5. Re-install air cleaner filter housing,

3. Squeeze the two tabs on the side of the bulb socket andpull straight out from the fog lamp.4. Disconnect the wire harness from the bulb.CAUTION!Do

As a guide, if you are shorter than average, you willprefer a lower position, and if you are taller than average,you will prefer a higher position.Lap

Back-up Lamp1. Open the liftgate.2. Use a fiber stick or flat blade screw driver to pry thelower trim from the liftgate.3. Once the trim is loose, pul

FLUID CAPACITIESU.S. MetricFuel (Approximate)2.4L and 3.2L Engines 15.8 Gallons 60 LitersEngine Oil With Filter2.4 Liter Engine (SAE 0W-20, API Certif

FLUIDS, LUBRICANTS AND GENUINE PARTSEngineComponent Fluid, Lubricant, or Genuine PartEngine Coolant We recommend you use MOPAR® Antifreeze/Coolant 10

Component Fluid, Lubricant, or Genuine PartSpark Plugs – 2.4L Engine We recommend you use MOPAR® Spark Plugs (Gap 0.047 in [1.2 mm])Spark Plugs – 3.2L

MAINTENANCE SCHEDULESCONTENTS䡵 MAINTENANCE SCHEDULE ...644 ▫ Maintenance Chart...6468MAINTENANCESCHEDULES

MAINTENANCE SCHEDULEYour vehicle is equipped with an automatic oil changeindicator system. The oil change indicator system willremind you that it is t

Severe Duty All ModelsChange Engine Oil at 4000 miles (6,500 km) if the vehicleis operated in a dusty and off road environment. Thistype of vehicle us

Maintenance ChartRefer to the Maintenance Schedules on the followingpages for the required maintenance intervals.Mileage or time passed (whichever com

Mileage or time passed (whichever comes first)20,00030,00040,00050,00060,00070,00080,00090,000100,000110,000120,000130,000140,000150,000Or Years: 2 3

Seat Belts In Passenger Seating PositionsThe seat belts in the passenger seating positions areequipped with Automatic Locking Retractors (ALR)which ar

WARNING!• You can be badly injured working on or around amotor vehicle. Do only service work for which youhave the knowledge and the right equipment.

IF YOU NEED CONSUMER ASSISTANCECONTENTS䡵 SUGGESTIONS FOR OBTAINING SERVICE FORYOUR VEHICLE ...651▫ Prepare For The Appointment...

䡵 DEPARTMENT OF TRANSPORTATION UNIFORMTIRE QUALITY GRADES ...657▫ Treadwear...657▫ Traction Grades ...

SUGGESTIONS FOR OBTAINING SERVICE FORYOUR VEHICLEPrepare For The AppointmentIf you are having warranty work done, be sure to havethe right papers with

Warranty service must be done by an authorized dealer.We strongly recommend that you take the vehicle to anauthorized dealer. They know your vehicle t

Chrysler Group LLC Customer CenterP.O. Box 21–8004Auburn Hills, MI 48321–8004Phone: (877) 426–5337Chrysler Canada Inc. Customer CenterP.O. Box 1621Win

expires. The manufacturer stands behind only the manu-facturer’s service contracts. If you purchased a manufac-turer’s service contract, you will rece

WARRANTY INFORMATIONSee the Warranty Information Booklet, located on theDVD, for the terms and provisions of Chrysler GroupLLC warranties applicable t

In CanadaIf you believe that your vehicle has a safety defect, youshould contact the Customer Service Department imme-diately. Canadian customers who

Owner’s ManualsThese Owner’s Manuals have been prepared with theassistance of service and engineering specialists to ac-quaint you with specific Chrys

position that has a belt with this feature. Children 12years old and under should always be properly re-strained in a vehicle with a rear seat.How To

significantly from the norm due to variations in drivinghabits, service practices, and differences in road charac-teristics and climate.Traction Grade

material of the tire to degenerate and reduce tire life, andexcessive temperature can lead to sudden tire failure. Thegrade C corresponds to a level o

INDEX10

ABS (Anti-Lock Brake System) ...451Adaptive Cruise Control (ACC) (Cruise Control) . . .189Adding Engine Coolant (Antifreeze) ...

Automatic Transaxle ...417Automatic Transmission ...420Adding Fluid ...613Fluid and Filter

Oil (Engine) ...583Radiator (Coolant Pressure) ...607Carbon Monoxide Warning ...118Cargo Area Cove

Pressure Cap ...607Radiator Cap ...607Selection of Coolant (Antifreeze) ...604Corrosion Protec

Jump Starting ...570Overheating ...545Emission Control System Maintenance ...586Engine ...

Engine Oil ...592Engine Oil Disposal ...592FlashersHazard Warning ...545Turn Signal ..

Energy Management FeatureThis vehicle has a safety belt system with an EnergyManagement feature in the front seating positions to helpfurther reduce t

Gasoline, Clean Air ...512Gasoline (Fuel) ...511Gasoline, Reformulated ...512GaugesCool

Hill Start Assist...456HitchesTrailer Towing ...525Holder, Coin...303Holder, C

Lane Change and Turn Signals ...171Lane Change Assist ...172Lap/Shoulder Belts...56Latches ...

License ...638Lights On Reminder ...169Malfunction Indicator (Check Engine) ...325Parade Mode (Dayt

Memory Feature (Memory Seat) ...159Memory Seat ...159Memory Seats and Radio ...159Methanol ...

Oil Filter, Selection ...593Onboard Diagnostic System ...585Opener, Garage Door (HomeLink®) ...275Operati

Rear ParkSense System ...231Rear Seat, Folding ...156Rear Window Defroster ...309Rear Window

Safety Information, Tire ...474Safety Tips ...117Schedule, Maintenance ...644Seat Belt

Side View Mirror Adjustment...132Signals, Turn ...121Sky Slider Power Roof...289SmartBeams .

System, Remote Starting ...29Tachometer...318Telescoping Steering Column ...181Temperature

passenger is unbelted, the Seat Belt Reminder Light willturn on and remain on until both front seat belts arefastened.The BeltAlert® warning sequence

Tread Wear Indicators ...493Tire Safety Information ...474Tongue Weight/Trailer Weight ...527To Open H

Upholstery Care ...619Vanity Mirrors ...135Vehicle Identification Number (VIN) ...7Vehicle Lo

VEHICLES SOLD IN CANADAWith respect to any Vehicles Sold in Canada, the nameChrysler Group LLC shall be deemed to be deleted and thename Chrysler Cana

1283259cv1 14WK741-126-AA Grand Cherokee Chrysler 1" gutter 12/05/2012 15:56:03Grand CherokeeChrysler Group LLC OWNER’S MANUAL 2014 Gran

Seat Belts And Pregnant WomenWe recommend that pregnant women use the seat beltsthroughout their pregnancy. Keeping the mother safe isthe best way to

Failure to use the driver and passenger seat belts pro-vided is a major cause of severe or fatal injury. In fact, theU.S. government notes that the un

panel below the steering column and a SupplementalPassenger Side Knee Air Bag mounted in the instrumentpanel below the glove compartment.NOTE: The Dri

and rear passengers sitting next to a window. The SABICair bags, are located above the side windows and theircovers are also labeled: SRS AIRBAG.This

• Supplemental Passenger Side Knee Air Bag• Front and Side Impact Sensors• Front Seat Belt Pretensioners, Seat Belt Buckle Switch,and Seat Track Posit

Supplemental Seat-Mounted Side Air Bags (SAB)Supplemental Seat-Mounted Side Air Bags (SAB) mayprovide enhanced protection to help protect an occupantd

NOTE:• Air Bag covers may not be obvious in the interior trim,but they will open during air bag deployment.• Being too close to the SAB and SABIC air

WARNING!• Your vehicle is equipped with left and rightSABIC, do not stack luggage or other cargo up highenough to block the location of the SABIC. The

Along with seat belts and pretensioners, Advanced FrontAir Bags work with the Supplemental Driver and Pas-senger Side Knee Air Bags and the knee bolst

including the severity and type of collision. AdvancedFront Air Bags and Supplemental Driver and FrontPassenger Knee Air Bags are not expected to redu

The ORC contains a backup power supply system thatmay deploy the air bags even if the battery loses power orit becomes disconnected prior to deploymen

• Occupant Classification Module (OCM) located in thefront passenger seat• OCS Sensor located in the front passenger seat• Air Bag Warning LightThe OC

6 INTRODUCTION

WARNING!• Never place a rear facing infant seat in front of anair bag. A deploying Passenger Advanced Front AirBag can cause death or serious injury t

WARNING!Occupants in the front passenger seat sitting improp-erly may cause the OCS to not classify the passen-ger’s weight accurately. This may resul

The OCS may not classify the front passenger properly if:• The front passenger’s weight is transferred to anotherpart of the vehicle (like the door, a

Not Seated Properly Not Seated Properly2THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 81

Not Seated Properly Not Seated Properly82 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

SWARNING!Placing an object on the floor under the front pas-senger seat may prevent the OCS from workingproperly, which may result in serious injury o

WARNING!Make sure that objects inside the Flip ’n Stow™Front Passenger Seat Storage bin do not interferewith the latch before closing the seat. In add

WARNING! (Continued)passenger if the vehicle is involved in a collision. Amodified vehicle may not comply with requiredFederal Motor Vehicle Safety St

Air Bag deploys down and around the knee blocker/glove box surface allowing the air bags to inflate to thefull size. The air bags fully inflate in abo

where the SABIC inflates. This especially applies tochildren. The SABIC is only about 3-1/2 in (9 cm) thickwhen it is inflated.Because air bag sensors

WARNINGS AND CAUTIONSThis Owners Manual contains WARNINGS against oper-ating procedures that could result in a collision or bodilyinjury. It also cont

If A Deployment OccursThe Advanced Front Air Bags are designed to deflateimmediately after deployment.NOTE: Front and/or side air bags will not deploy

Do not drive your vehicle after the air bags have de-ployed. If you are involved in another collision, the airbags will not be in place to protect you

WARNING! (Continued)• Do not attempt to modify any part of your air bagsystem. The air bag may inflate accidentally or maynot function properly if mod

• The Air Bag Warning Light remains on after the four toeight-second interval.• The Air Bag Warning Light comes on intermittently orremains on while d

NOTE: EDR data are recorded by your vehicle only if anon-trivial crash situation occurs; no data are recorded bythe EDR under normal driving condition

Before buying any restraint system, make sure that it hasa label certifying that it meets all applicable SafetyStandards. You should also make sure th

Summary Of Recommendations For Restraining Children In VehiclesChild Size, Height, Weight or Age Recommended Type of Child RestraintInfants and Toddle

Infants And Child RestraintsSafety experts recommend that children ride rearward-facing in the vehicle until they are two years old or untilthey reach

have outgrown the rear-facing weight or height limit oftheir rear-facing convertible child seat. Children shouldremain in a forward-facing child seat

Integrated Child Booster Seat — If EquippedThe Integrated Child Booster Seat is located in eachoutboard second-row passenger seat. The Booster Seat is